Tracker 4WD L4-1.6L VIN 6 (1998)
Oxygen Sensor: Testing and Inspection
Oxygen Sensor Diagnosis
Diagnose the Fuel Control Heated Oxygen Sensor (HO2S 1) is diagnosed for the following conditions:
^
A Slow Response.
^
An Inactive Signal (output steady at bias voltage-approx. 450 mV).
^
A Signal Fixed High.
^
A Signal Fixed Low.
Diagnose the Catalyst Monitor Heated Oxygen Sensor (HO2S 2) is diagnosed for the following functions:
^
The Heater Performance (time to activity on cold start)
^
A Signal fixed low during steady state conditions or power enrichment (hard acceleration when a rich mixture should be indicated).
^
A Signal fixed high during steady state conditions or decel fuel mode (deceleration when a lean mixture should be indicated).
^
An Inactive Sensor.
For further Oxygen Sensor testing and diagnostic charts, refer to Computers and Control Systems / Testing and Inspection. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection