Tracker 4WD L4-1.6L VIN 6 (1998)
19. Inspect the starter solenoid plunger by pressing the plunger in and releasing it. It the plunger does not return to its original position quickly, replace
the starter solenoid (1).
20. Inspect the internal gear assembly (1) and the idle gears (2,3) for wear, damage or other abnormal conditions. Replace as necessary.
Assembly Procedure
1. Lightly grease the gear shaft with Lubriplate lubricant GM P/N 1050109, or the equivalent.
2. Install the overrunning clutch assembly and the overrunning clutch stop ring to the gear shaft assembly.
3. Install the overrunning clutch retaining ring to the gear shaft assembly. Slide the overrunning clutch stop ring (4) away from the overrunning clutch
assembly to cover the overrunning clutch retaining ring (2).