Tracker 4WD L4-1.6L VIN 6 (1998)
1. Tie rod end and locknut to tie rod connector sleeve.
2. Align the marks (made during the removal procedure) denoting the position of the tie rod end locknut with the tie rod thread.
3. Tie rod end to steering knuckle; secure with castle nut.
^
Tighten the tie rod end castle nut to 45 Nm (33 ft. lbs.).
4. Cotter pin to tie rod end. Bend end of pin following installation.
^
Inspect for proper toe adjustment.
^
Tighten the tie rod end locknut to 65 Nm (48 ft. lbs.).
5. Tire/wheel to vehicle.
6. Lower vehicle.
