Tracker 4WD L4-1.6L VIN 6 (1998)
11. Use the hub bolts in order to install the J 42119-1 and the J 42119-2 to the spindle nut and the wheel hub. Be sure to align the wrench with the
slots on the spindle nut.
Tighten the spindle nut to 210 Nm (155 ft. lbs.).
12. On two-wheel drive models, install the hub end cap.
13. On four-wheel drive models, install the free wheel hub. Refer to Locking Hub Replacement (Automatic Locking Hub).
14. Install the brake rotor to the wheel hub.
15. Install the brake caliper to the rotor and the knuckle. Secure the brake caliper with two caliper carrier bolts.
Tighten the brake caliper carrier bolts to 88 Nm (65 ft. lbs.).
16. Install the tire and wheel assembly.
17. Lower the vehicle.