Tracker 4WD L4-1.6L VIN 6 (1998)
12. Install the transmission drain plug (1) into the transmission.
^
Tighten the transmission drain plug to 16 Nm (12 ft. lbs.).
13. Align the index marks (1) made during the front propeller shaft removal (four-wheel drive models).
14. Install the front propeller shaft into the vehicle (four-wheel drive models).
15. Secure the front propeller shaft with four nuts and four bolts.
^
Tighten the front propeller shaft nuts and bolts to 50 Nm (37 ft. lbs.).
16. Lower the vehicle.
17. Connect the negative battery cable (4).
18. Refill the transmission as necessary using the following steps:
18.1.
Place the vehicle on a level surface.
