Tracker 4WD L4-1.6L VIN 6 (1998)
Fluid Line/Hose: Service and Repair
REMOVAL PROCEDURE
1. Raise the vehicle. Support the vehicle.
2. Remove the 4 bolts.
3. Remove the front skid plate.
4. Place a drain pan or suitable container under the transmission cooler hoses.
5. Remove the2 screws from the cooler hose retainer clamps (2).
6. Remove the cooler hoses from the cooler hose retainer clamps.
7. Remove the following items from the transmission cooler:
^
The 2 inlet hose clamps
^
The 2 outlet hose clamps
^
The transmission cooler hoses
8. Remove the following items from the inlet and outlet cooler pipes at the transmission:
^
The inlet hose clamps (3)
^
The 2 outlet hose clamps (3)
^
The transmission cooler hoses (1, 2)
9. Place a drain pan or suitable container under the transmission cooler pipes.