Tracker 4WD L4-1.6L VIN 6 (1998)
2. Install the cooler pipe clamp (2) to the transmission cooler (1) pipe bracket.
3. Secure the cooler pipe clamp with one bolt.
^
Tighten the cooler pipe clamp bolt to 23 Nm (17 ft. lbs.).
4. Install the transmission cooler hoses to the inlet (1) and the outlet (2) cooler pipes at the transmission.
5. Secure the transmission cooler hoses with the 2 inlet and outlet hose clamps (3).
6. Install the transmission cooler hoses to the transmission cooler (1).
7. Secure the transmission cooler hoses with the 2 inlet and outlet hose clamps (2).
8. Install the transmission cooler hoses to the cooler hose retainer clamps.
9. Secure the transmission cooler hoses with the 2 screws.
10. Install the front skid plate to the vehicle.
11. Secure the front skid plate with the 4 bolts.
^
Tighten the front skid plate bolts to 54 Nm (40 ft. lbs.).
12. Lower the vehicle.