Tracker 4WD L4-1.6L VIN 6 (1998)
8. Place an index mark (reference mark) (1) on the propeller shaft pinion flange and on the front differential pinion flange of the transfer case to the
front differential propeller shaft.
IMPORTANT: Perform the next two steps for four-wheel drive vehicles equipped with the 03-72LE, 4-speed automatic transmission.
9. Remove the four bolts and the four nuts from the pinion flange yoke (2).
10. Separate the pinion flange yoke (2) from the front differential pinion flange (3).
11. Position and support the transfer case to the front differential propeller shaft away from the transmission fluid pan.
IMPORTANT: Removing the propeller shaft from the transfer case will result in fluid loss.
12. Remove the transmission range switch electrical connector from the transmission range switch (1).
