Tracker 4WD L4-1.6L VIN 6 (1998)
5. Install the transmission fluid pan (2) and gasket to the transmission. Refer to AT Fluid/Filter Changing.
6. Attach the pinion flange yoke (2) to the front differential pinion flange (3) aligning the index (reference marks) (1) on the pinion flange.
IMPORTANT: Perform the next step for four-wheel drive vehicles equipped with the 03-72LE, 4-speed automatic transmission.
7. Secure the pinion flange yoke (2) with four bolts and nuts.
^
Tighten the propeller shaft bolts and nuts to 50 Nm (37 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
8. Install the TV cable casing (2) into the TV cable bracket (1) at the throttle body.
9. Install the TV cable (1) to the throttle body linkage.
