Tracker 4WD L4-1.6L VIN 6 (1998)
14. Remove the inner pinion bearing races (1) from the differential carrier using a large drift punch and a hammer. Tap around the rear of each bearing
race and slowly drive each race out evenly.
15. Remove the outer pinion bearing races (1) from the differential carrier using a large drift punch and a hammer, Tap around the rear of each bearing
race and slowly drive each race out evenly.
16. Remove the side bearings (1) from the differential case using the J 22888-D with the J 8107-4.
17. Remove the ten bolts and the ring gear from the differential case.