Tracker 4WD L4-1.6L VIN 6 (1998)
11. Rotate the J 8001 adjustable face so that the needle indicates 0.
12. Slowly rotate the J 23597-1 back and forth so that the spring loaded plunger extension sweeps back and forth across the J 21777-102 while
observing the J 8001.
13. Stop the J 23597-1 at the J 8001 greatest point of deflection.
14. Without disturbing the J 8001 needle setting, rotate the J 8001 adjustable face so that the needle indicates 0.
15. Slowly rotate the J 23597-1 until the spring loaded plunger extension is no longer making contact with the J 21777-102
16. Record the deflection reading on the J 8001.
IMPORTANT: This reading indicates the selective shim required for the correct pinion depth. Refer to the Spacer and Shim Specifications
Pinion Depth Selective Shims Table for the appropriate shim size.
17. Remove the J 8001 and the spring loaded plunger extension from the J 23597-1
18. Remove the J23597-1 and the two J 21777-101 from the differential carrier.
19. Remove the J 21777-102, the J 3289-21,the J 21777-43 and the J 21777-42 from the differential carrier.
20. Remove the inner pinion bearings from the differential carrier.
21. Remove the outer pinion bearing from the differential carrier.
