Tracker 4WD L4-1.6L VIN 6 (1998)
11. Install the rear antilock brake shoe return spring (2) to both rear brake shoes.
12. Install the rear brake drum to the rear axle. Refer to Brake Drum Replacement in Brakes.
13. Install the rear tire and wheel assembly. Refer to Wheel Installation in Tires and Wheels.
14. Apply GM P/N 12346004, or equivalent, to the threaded portion of the rear axle housing drain plug.
15. Install the rear axle housing drain plug (2) into the rear axle housing.
^
Tighten the rear axle housing drain plug to 25 Nm (18 ft. lbs.).
16. Refill the rear axle housing with approximately 2.2 liters (4.6 pts.) of 80W-90 GL5 lubricant GM P/N 12345977, or equivalent. The oil level
should be even with the bottom of the rear axle housing oil level/filler plug hole.
17. Install the rear axle housing oil level/filler plug (1) into the rear axle.
^
Tighten the rear axle housing oil level/filler plug to 43 Nm (32 ft. lbs.).
18. Remove the drain pan from under the rear axle housing.
19. Lower the vehicle.
