Tracker 4WD L4-1.6L VIN 6 (1998)
15. Remove the one bolt and the rear transmission mount (2) from the extension case (1).
16. Place a wood block between the distributor gear housing and the bulkhead (2) in order to prevent the distributor and the other components from
being damaged when the transmission is lowered.
17. Lower the transmission slowly until the engine contacts its support point on the wood block.
18. Remove one clamp and breather hose from the gearshift lever case.
19. Remove the ten bolts and the gearshift lever case (1) from the extension case (2).