Tracker 4WD L4-1.6L VIN 6 (1998)
10. Install the transmission oil level/filler plug (2) into the transmission.
^
Tighten the transmission oil level/filler plug to 28 Nm (20 ft. lbs.).
Rear Case Countershaft Plug Replacement
INSTALLATION PROCEDURE
^
Tools Required
-
J 37758 Countershaft Rear Plug Installer
-
J 37750 Oil Seal Installer
-
J 36850 Transjel (R) Transmission Assembly Lubricant
1. Install the rear countershaft plug (1) into the rear case (2) using the J 37758 and the J 8092 and a hammer.
2. Install the new rear case oil seal (1) into the rear case (2) using the J 37750 and a hammer.
3. Apply the J 36850 to the new rear case oil seal lip.
4. Apply the GM P/N 12346240, or equivalent, to the transmission rear case mating surface.
