Tracker 4WD L4-1.6L VIN 6 (1998)
Fluid - M/T: Testing and Inspection
1. Raise and suitably support the vehicle.
2. Remove the transmission oil level/filler plug (2) from the transmission.
3. Inspect the transmission oil level.
IMPORTANT: The oil level should be even with the bottom of the transmission oil level/filler plug (2) hole.
4. If the oil level is low, adjust the oil level accordingly with synthetic 75W-90 4GL lubricant, or equivalent.
5. Apply GM P/N 12346004, or equivalent, to the threaded portion of the transmission oil level/filler plug (2).
6. Install the transmission oil level/filler plug (2) into the transmission.
