Tracker 4WD L4-1.6L VIN 6 (1998)
Shifter M/T: Service and Repair
Gearshift Lever Case Removal
REMOVAL PROCEDURE
1. Remove the gearshift control lever from the gearshift lever case. Refer to Gearshift Control Lever Removal.
2. Remove four bolts from the fan shroud at the radiator.
3. Raise and support the vehicle.
4. Place a drain pan or suitable container underneath the transmission.
5. Remove the transmission oil level/filler plug (2) from the transmission.
6. Remove the transmission drain plug (3) from the transmission and drain the transmission oil.
7. Place index marks on the propeller shaft pinion flange yoke and the differential pinion flange to ensure correct installation.
8. Remove the following items from the vehicle:
