Tracker 4WD L4-1.6L VIN 6 (1998)
Speedometer Gear, M/T: Service and Repair
Speedometer Driven Gear Replacement
REMOVAL PROCEDURE
1. Raise and support the vehicle.
2. Remove the speedometer cable (3) from the speedometer drive gear case.
3. Remove the following items from the extension case:
^
One bolt (2).
^
The ground wire (1)
^
The speedometer driven gear case.
4. Remove the following items from the speedometer driven gear case:
^
One roll pin.
^
The speedometer driven gear case (1).
5. Remove the speedometer driven gear lip seal (1) from the speedometer driven gear case (2).