Tracker 4WD L4-1.6L VIN 6 (1998)
1. Install the gearshift control lever into the gearshift lever case by pushing down on the shift control lever pivot and turning clockwise 90 degrees
(1/4 turn) and releasing.
2. Install the gearshift lever case boot to the gearshift lever case. Secure the boot with one clamp.
3. Install the gearshift control lever boot (1) and the boot cover onto the gearshift control lever (2). Secure the boot and the cover with eight screws.
4. Install the gearshift control lever knob (1) onto gearshift control lever. Secure the knob with one screw.
5. Install the front console box to the floor. Secure the front console box with two plastic retainers and two screws.
6. Install the rear console box to the floor. Secure the rear console box with two plastic retainers and two screws,
