Tracker 4WD L4-1.6L VIN 6 (1998)
18.2.
Remove the fluid level indicator.
18.3.
Add proximate 1.5 liters (1.6 quarts) of Dexron (R) III automatic transmission fluid GM P/N 12346143, or the equivalent, into the fluid
filler tube.
18.4.
Install the fluid level indicator into the fluid filler tube.
18.5.
Apply the parking brake and block the vehicle wheels.
18.6.
Start the engine with the selector lever in the PARK position. DO NOT race the engine.
18.7.
Run the engine at idle and move the selector lever through each range and return it to the PARK position.
18.8.
With the engine running at idle, remove the fluid level indicator from the filler tube and wipe the indicator off.
18.9.
Reinsert the fluid level indicator into the filler tube making sure it is seated in its original position.
18.10. Remove the indicator and check the fluid level. The level should be between the FULL HOT (2) and the LOW HOT (3) marks. Add fluid
in order to bring the fluid level to the FULL HOT mark if the level is below the LOW HOT mark. Bringing the fluid level from the LOW
HOT mark to the FULL HOT mark required 0.3 liters (0.3 quarts) of fluid. Use Dexron (R) III automatic transmission fluid GM P/N
12346143, or the equivalent.
18.11. Conduct a road test and check the transmission level.
