Tracker 4WD L4-1.6L VIN 6 (1998)
Wiper Arm: Service and Repair
Wiper Blade Replacment
REMOVAL PROCEDURE
1. Remove the spare tire cover.
2. Remove the spare tire lock and the wheel nuts.
3. Remove the spare tire from the rear door in order to access the rear wiper arm.
IMPORTANT: Before removing the rear wiper arm, note the wiper arm location for proper installation.
4. Lift the nut cover (8) in order to gain access to the rear wiper arm retaining nut.
5. Remove the rear wiper arm retaining nut from the rear wiper arm (1).
