Tracker 4WD L4-1.6L VIN 6 (1998)
Wiper Blade: Service and Repair
Rear
Wiper Blade Assembly Replacement
REMOVAL PROCEDURE
1. Depress the retaining tab (3) on the rear wiper blade assembly (2).
2. While depressing the tab (3), slide the blade assembly (2) down the rear wiper arm (4) until the blade clears the wiper arm hook (1).
3. Remove the blade assembly (2) from the wiper arm (4).
INSTALLATION PROCEDURE
1. Install the rear wiper blade assembly (2) to the rear wiper arm (4) by sliding the blade assembly (2) into the wiper arm hook (1).
2. Slide the blade into the wiper arm hook (1) until the blade assembly (2) clicks and locks into place.
Wiper Blade Element Replacement
REMOVAL PROCEDURE
1. Lift the rear wiper blade rubber tip in order to clear the retaining tab (2).
2. While lifting the rubber tip, slide the blade rubber (3) out of the rear wiper blade assembly (1).
INSTALLATION PROCEDURE
Slide the rear wiper blade rubber (3) completely through the rear wiper blade assembly (1) until the blade rubber (3) snaps into place and locks.