Tracker 4WD L4-1.6L VIN 6 (1998)
Wiper Motor: Service and Repair
Front Wiper Motor
REMOVAL PROCEDURE
1. Disconnect the front wiper motor electrical connector (4).
2. Remove the 4 mounting bolts (1) which secure the front wiper motor (3).
3. Pull the front wiper motor (3) away from the bulkhead.
IMPORTANT: Do not service the front wiper motor crank arm separately. Do not disconnect the front wiper motor crank arm from the front
wiper motor. The crank arm is positioned on the wiper motor in order to allow the front wiper arms to return to their normal park position.
4. Gently pry the front wiper linkage (2) from the front wiper motor crank arm (1).
5. Remove the front wiper (3) motor from the vehicle.
INSTALLATION PROCEDURE
