Tracker 4WD L4-2.0L VIN C (1999)
Radio/Stereo: Service and Repair
REMOVAL PROCEDURE
1. Remove the IP accessory center trim plate.
2. Remove the 4 screws (1) which secure the radio to the instrument panel.
3. Pull the radio (3) forward in order to gain the necessary clearance to disconnect the radio electrical connector (1) and antenna lead (2).
4. Disconnect the electrical connector (1) and antenna lead (2) from the radio (3).
5. Remove the radio (3) from the vehicle.
6. Remove the 4 screws which secure the radio bracket (4) to the radio (3), if necessary.
7. Remove the radio bracket (4) from the radio (3), if necessary.
INSTALLATION PROCEDURE