chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Door Panel > < Hinge Replacement - Door (Lower Hinge)|Page 8126
Page 1
background image

Front Door Limiter: Service and Repair

REMOVAL PROCEDURE

1. Remove the front side door water deflector.
2. Remove the front side door check pin (2) which secures the front side door check (3) to door jamb.
3. Remove the following components from the door:

^

The 2 bolts (1)

^

The door check (3)

INSTALLATION PROCEDURE

NOTE:  Refer to Fastener Notice in Service Precautions.

1. Install the front side door check (3) to the door through the inner door panel access hole. Secure the check with the 2 bolts (1).

Tighten
Tighten the front side door check bolts to 10 N.m (89 lb in).

2. Install the door check (3) to the door jamb. Secure the check with the pin (2).
3. Install the front side door water deflector. 

Front Door Panel > < Hinge Replacement - Door (Lower Hinge)|Page 8126