Tracker 4WD L4-2.0L VIN C (1999)
IMPORTANT: Do not pull the piston out of the cylinder.
6. Pull on the piston in order to confirm that the boot is properly fitted in the caliper groove.
7. Push the piston into the caliper. Seat the piston in the caliper bore.
IMPORTANT: Tighten the bleeder valve while bleeding the hydraulic brake system.
8. Install the bleeder valve. DO NOT tighten.
9. Install the caliper on the vehicle.
10. Install the tire and wheel assembly.
11. Lower the vehicle.
12. Bleed the brake system.
