Tracker 4WD L4-2.0L VIN C (1999)
INSTALLATION PROCEDURE
1. Before installing the drum, measure the outer diameter of the brake shoes (3). The outer diameter of the brake shoes should be between 219.4 mm
(8.638 inch) and 219.7 mm (8.650 inch). If the outer diameter of the brake shoes is not within specification, turn the adjuster (2) in order to adjust
the outer diameter of the shoes.
2. Install the brake drum. Verify that the drum is free of dirt and oil.
3. Install the locking washers to the wheel studs.
4. Install the tire and wheel assembly.
5. Lower the vehicle.
6. Press the brake pedal three to ten times with about 30 kg (66 lb) in order to obtain the proper drum-to-shoe clearance.
7. Adjust the parking brake.
8. Install the console. Secure with 4 screws (1,3,4,6) and 2 clips (2,5).
