Tracker 4WD L4-2.0L VIN C (1999)
8. Disconnect the park brake cable (3) from the park brake shoe lever.
9. Remove the brake shoes with the park brake shoe lever attached.
10. Remove the park brake shoe lever (1) and the retainer (3) from brake shoe (2).
11. Inspect the brake shoe components.
INSTALLATION PROCEDURE
IMPORTANT: Apply Lubriplate Lubricant, GM P/N 1050109, or the equivalent white lithium grease, to all of the brake component metal contact
points (where the brake shoe metal contacts the backing plate, the wheel cylinder, the adjustment strut, etc.) prior to installation.
1. Install the park brake shoe lever (1) to the brake shoe (2). Secure with the retainer (3).
