Tracker 4WD L4-2.0L VIN C (1999)
^
The caliper slide bushings
^
The caliper set ring
^
The piston
^
The caliper cylinder bore
11. Inspect the piston for scoring, corrosion and any damage to the chrome plating. Replace the piston if any of these conditions exist.
12. Inspect the caliper cylinder bore for scoring, pitting and corrosion. Use a crocus cloth to polish out any light corrosion. If the corrosion cannot be
removed, replace the caliper.
ASSEMBLY PROCEDURE
1. Assemble the new caliper pin bolts and boots into the caliper.
2. Assemble a new piston seal into the caliper bore.
3. Install a new piston boot (2) onto the piston (1).
4. Install the piston into the caliper (1).
5. Fit the piston boot (3) onto the caliper groove.