Tracker 4WD L4-2.0L VIN C (1999)
Brake Master Cylinder: Service and Repair
Master Cylinder Replacement
Master Cylinder Replacement (ABS)
REMOVAL PROCEDURE
CAUTION: Refer to Brake Fluid Irritant Caution in Service Precautions.
NOTICE: Refer to Brake Fluid Damage to Electrical Connections Notice in Service Precautions.
1. Disconnect the reservoir fluid level connector (2).
2. Clean the reservoir and the master cylinder.
3. Remove the reservoir.
4. Disconnect the brake pipes from the master cylinder.
5. Disconnect the brake pipes (1, 4) from the proportioning valve (3).
6. Remove the master cylinder attaching nuts.
7. Remove the master cylinder with the proportioning valve from the brake booster.
8. Separate the proportioning valve from the master cylinder.
9. Disassemble, inspect, and reassemble the master cylinder, if necessary.
INSTALLATION PROCEDURE