Tracker 4WD L4-2.0L VIN C (1999)
7. Remove the upper BPMV bracket mounting bolt that connects the upper BPMV mounting bracket (2) to the lower mounting bracket (3).
8. Remove the BPMV (4) and the EBCM (1) as an assembly from the vehicle.
NOTICE: Be careful not to damage the EBCM seal when removing the EBCM.
9. Remove the EBCM (2) if replacing the BPMV (4) only.
INSTALLATION PROCEDURE
1. Install the EBCM (2) onto the BPMV (4) if replacing the BPMV only.