Tracker 4WD L4-2.0L VIN C (1999)
15. Disconnect the park brake cable (3) from the park brake shoe lever.
IMPORTANT: The color ring on the park brake cable is for identification.
16. Squeeze the park brake cable stopper ring (2) in order to remove the cable (3) from the backing plate (1).
17. Remove the 3 park brake retainer bolts and the 3 park brake retainers.
18. Remove the park brake cable and the grommet from the vehicle.
INSTALLATION PROCEDURE
NOTICE: Refer to Fastener Notice in Service Precautions.
1. Install the park brake cable and the grommet to the vehicle.
2. Secure the park brake cable with the 3 park brake retainers and the 3 park brake retainer bolts.
^
Tighten the park brake retainer bolts to 10 Nm (88.5 inch lbs.).
IMPORTANT: The color ring on the park brake cable is for identification. Ensure the new park brake cable has the same color on the ring as the
old park brake cable.
3. Install the brake cable stopper ring (2) and the park brake cable (3) to the backing plate (1).
