Tracker 4WD L4-2.0L VIN C (1999)
7. Remove the park brake lever bolts (1) and the park brake lever (2) from the equalizer (5).
8. Remove the pin (6) and the equalizer from the park brake cable (4).
INSTALLATION PROCEDURE
NOTICE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: The equalizer must be within 15 degrees of perpendicular to the park brake lever cable.
1. Install the equalizer (5) to the park brake cable (4). Secure with the pin (6).
2. Install the park brake lever (2) to the equalizer. Secure with three bolts (1).
^
Tighten the bolts to 23 Nm (17 ft. lbs.).
