Tracker 4WD L4-2.0L VIN C (1999)
4. Install the cruise control servo cable (3) to the cruise control servo assembly (1).
5. Adjust the cruise control servo cable locknut (5) in order to adjust the cruise control cable play.
NOTE: Refer to Fastener Notice in Cautions and Notices.
6. Adjust the cruise control servo cable play to 1-2 mm (0.04-0.08 in) at the servo closed throttle position.
Tighten
Tighten the cruise control servo cable locknut to 5 N.m (44 lb in).
7. Install the cruise control module cover (1).
