Tracker 4WD L4-2.0L VIN C (1999)
Cruise Control Switch: Service and Repair
Cruise Control Switch Replacement
REMOVAL PROCEDURE
1. Remove the following components from the instrument panel:
1.1. The 3 screws (2)
1.2. The IP steering column opening trim plate (1)
2. Release the upper and lower retaining tabs behind the instrument panel which secure the cruise control switch (6).
3. Slide the cruise control switch (6) from the instrument panel in order to disconnect the electrical connector.
4. Disconnect the cruise control switch electrical connector.
5. Remove the cruise control switch (6) from the vehicle.
INSTALLATION PROCEDURE
