Tracker 4WD L4-2.0L VIN C (1999)
6.
Tighten bolt "3" snug while holding the power steering pump bracket to the rear of the engine.
Important:
Bolts "1" and "2" control the plane of the power steering pump bracket.
7.
Tighten bolt "1" snug.
8.
Tighten bolt "2" snug.
9.
Tighten the 3 bolts.
Tighten
Tighten the bolts to 25 N.m (18.5 lb ft)
10.
Install the generator and the bolt to the power steering pump bracket.
Tighten
Tighten the bolt to 23 N.m (17 lb ft).
11.
Install the power steering pump and the 3 bolts to the power steering pump bracket.
Tighten
Tighten the bolts to 25 N.m (18.5 lb ft).
12.
Install the serpentine belt.
12.1. Properly route and install the belt onto the drive pulleys.