Tracker 4WD L4-2.0L VIN C (1999)
5.
Install the power steering pump and bolts.
Tighten
Tighten the bolts to 25 N.m (18.5 lb ft).
6.
Install the serpentine belt.
6.1.
Property route and install the belt onto the drive pulleys.
6.2.
Use a wrench and rotate the belt tensioner clockwise.
6.3.
With pressure applied to the wrench, install the belt.
6.4.
With the belt installed properly, release the belt tensioner.
6.5.
Inspect that the belt is property installed on all pulleys. When a new belt is correctly installed, the hash mark will be within the indicated
range on the tensioner.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.