Tracker 4WD L4-2.0L VIN C (1999)
3. Ensure that the camshaft guide pins (1) are aligned with the notches (3) on the cylinder head.
4. Align the yellow link (1) of the camshaft timing chain with the arrow (2) on the idler sprocket.
5. Align the dark blue link (1) of the camshaft timing chain with the arrows (2, 3) on the camshaft sprockets.
6. Align the camshaft sprockets with the guide pins and install the camshaft timing sprockets and chain.
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the camshaft sprocket bolts (1).
Tighten the bolts to 80 Nm (58 ft. lbs.).
