Tracker 4WD L4-2.0L VIN C (1999)
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the timing chain fixed guide (2).
Tighten the 2 bolts to 9 Nm (62 inch lbs.).
8. Install the timing chain adjustable guide (1).
Tighten the bolt to 25 Nm (19 ft. lbs.).
9. Hold back the latch, compress the plunger and install a retainer (paper clip or similar tool) to hold the plunger in place.
10. Install the timing chain tensioner.
Tighten the 2 bolts (1) to 11 Nm (97 inch lbs.).
11. Remove the retainer from the tensioner.
