Tracker 4WD L4-2.0L VIN C (1999)
3. Install the 2 bolts to the expansion valve.
4. Install the evaporator inlet and outlet tubes to the expansion valve.
NOTE: Refer to Fastener Notice in Cautions and Notices.
5. Slide the plate (2) clockwise and install the bolt.
Tighten
Tighten the bolt to 35 N.m (26 lb ft).
6. Evacuate and recharge the refrigerant. Refer to Refrigerant Recovery and Recharging.
7. Operate the A/C system. Inspect for refrigerant leaks. Refer to Leak Testing.
