Tracker 4WD L4-2.0L VIN C (1999)
1. Install the dryer with the double layer portion facing the bottom of the receiver.
2. Install the filter to the receiver.
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Install the cap to the receiver.
Tighten
Tighten the receiver cap to 13 N.m (10 lb ft).
4. Lower the vehicle.
5. Evacuate and recharge the air conditioning system. Refer to Refrigerant Recovery and Recharging.
6. Operate the A/C system and test for refrigerant leaks. Refer to Leak Testing.