chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Instruments - Incorrect Fuel Gauge Reading|Page 8702 > < Instruments - Incorrect Fuel Gauge Reading|Page 8696
Page 1
background image

Fuel Gauge: All Technical Service Bulletins
Instruments - Incorrect Fuel Gauge Reading

File In Section: 06 - Engine/Propulsion System 

Bulletin No.: 99-06-04-051

Date: October, 1999

TECHNICAL

Subject:
Incorrect Fuel Gauge Reading/Binding Fuel Sensor Float Arm (Install New Fuel Tank Strap Spacers and Bolts)

Models:
1999 Chevrolet Tracker

Condition

Some customers may comment that after fueling their vehicle, the fuel gauge reading may be incorrect and that it appears to be stuck, indicating
approximately 1/4 tank of fuel.

Cause

Inadequate clearance between the fuel level sender float arm and a baffle internal to the fuel tank may result in an actual contact condition between the
arm and baffle. This contact may then result in an inaccurate input to the fuel gauge and an erroneous reading being indicated.

Correction

Install new fuel tank strap bolts and spacers contained in service kit, P/N 91175703, at the fuel tank strap to the underbody front attachments following
the procedure indicated below:

1.

Raise and suitably support the vehicle.

2.

Remove and discard the left front fuel tank strap attaching bolt.

3.

Install the spacer (1) between the fuel tank strap (2) and the vehicle underbody.

4.

Install the new fuel tank strap attaching bolt (4).

Tighten

Tighten the fuel tank strap attaching bolt to 35 N.m (26 lb ft).

5.

Repeat Steps 2 through 4 for the right front fuel tank strap attachment.

Instruments - Incorrect Fuel Gauge Reading|Page 8702 > < Instruments - Incorrect Fuel Gauge Reading|Page 8696