Tracker 4WD L4-2.0L VIN C (1999)
Tachometer: Service and Repair
REMOVAL PROCEDURE
1. Remove the instrument cluster.
2. Remove the instrument cluster lens and bezel assembly (2) from the instrument cluster (1) by releasing the 6 black plastic tabs.
IMPORTANT: Do not remove the needle from the tachometer. There is no detent or flat spot on the shaft in order to indicate the correct
placement.
3. Remove the following components from the instrument cluster (2):
3.1. The 3 screws (3)
3.2. The engine tachometer
INSTALLATION PROCEDURE