Tracker 4WD L4-2.0L VIN C (1999)
Drive Belt: Service and Repair
Drive Belt Replacement (Accessory)
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Use a wrench and rotate the belt tensioner clockwise.
3. With pressure applied to the wrench, and tension relieved from the drive belt, remove the accessory drive belt.
4. Inspect the belt for cuts, cracks, wear, deformation or other abnormalities. Replace as necessary.
Installation Procedure
1. Properly route and install the accessory drive belt onto the drive pulleys.
2. Use a wrench and rotate the belt tensioner clockwise.
3. With pressure applied to the wrench, install the accessory drive belt.
4. With the accessory drive belt installed properly, release the belt tensioner.