Tracker 4WD L4-2.0L VIN C (1999)
Radiator Hose: Service and Repair
Radiator Hose Replacement - Inlet
Removal Procedure
Caution: In order to help avoid being burned, do not remove the radiator cap while the engine and the radiator are hot. Scalding fluid and
steam can be blown out under pressure if the cap is removed too soon.
1. Drain the engine coolant.
2. Loosen and reposition the hose clamp on the radiator inlet hose (2) at the radiator.
3. Loosen and reposition the hose clamp on the radiator inlet hose at the coolant pipe.
4. Remove the radiator hose (2).
Installation Procedure
