Tracker 4WD L4-2.0L VIN C (1999)
Wheel Bearing: Service and Repair
Front Wheel Bearing Replacement
FRONT WHEEL BEARING/HUB
REMOVAL PROCEDURE
^
Tools Required
-
J 8092 Driver Handle
-
J 37772 Front Wheel Bearing Race Remover
-
J 37763 Front Wheel Bearing Lock Nut Remover
-
J 37781 Rear Axle Remover
-
J 2619-01 Slide Hammer
-
J 6627-A Wheel Stud Remover
IMPORTANT: If you are removing the hub in order to gain access to other components, you may remove the hub, the bearings, and the seals
together as a unit.
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the brake rotor.
4. Remove the cap from the spindle.
5. Remove the 6 bolts (1) and the bearing cover (2).
6. Remove the 4 screws (1) and the seal lock washer retainer (2).