Tracker 4WD L4-2.0L VIN C (1999)
Fuel Tank Pressure Sensor: Service and Repair
Fuel Tank Pressure Sensor Replacement
REMOVAL PROCEDURE
1. Remove the fuel tank from the vehicle.
2. Remove both the attaching bolts (1).
3. Remove the fuel tank pressure sensor electrical connector (3).
4. Remove the fuel tank pressure sensor (2).
INSTALLATION PROCEDURE
1. Install the fuel tank pressure sensor (2).
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install both the retaining bolts (1).
Tighten
Tighten the bolts to 3.5 N.m (30 lb in).
3. Reconnect the fuel tank pressure sensor electrical connector (3).
4. Reinstall the fuel tank.
