Tracker 4WD L4-2.0L VIN C (1999)
11. Disconnect the fuel pipe retaining clamps (2) from the fuel pipes (1).
12. Remove the fuel pipes (1) from the vehicle chassis.
INSTALLATION PROCEDURE
1. Install the fuel pipes (1) to the frame of the vehicle chassis.
2. Secure the fuel pipes (1) with the fuel pipe retaining clamps (2).
3. Connect the fuel vapor hose (3) to the fuel vapor pipe in the engine compartment.
4. Connect the fuel return hose (4) to the fuel return pipe in the engine compartment.
5. Connect the fuel feed hose (1) to the fuel feed pipe in the engine compartment.
