Tracker 4WD L4-2.0L VIN C (1999)
Throttle Position Sensor: Service and Repair
Throttle Position (TP) Sensor Replacement
REMOVAL PROCEDURE
1. Disconnect TP sensor electrical connector.
2. Remove both fasteners (3).
3. Remove the TP sensor (2).
INSTALLATION PROCEDURE
1. Install TP sensor (2).
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Tighten both fasteners.
Tighten
Tighten both fasteners to 3.5 N.m (30 lb in).
3. Reconnect TP sensor electrical connector.
