Tracker 4WD L4-2.0L VIN C (1999)
Remove the stones or debris (3) by pulling or prying the bottom of the inner fender (1) inwards at the locations (4) shown. By moving the bottom of the
inner fender inwards toward the engine, an exit path will be created between it and the strut support (2) which will allow the stones or debris to fall out.
After the stones or debris have been removed, move the inner fender inwards slightly more to increase the size of the exit path so that any future debris
may exit automatically. Perform this same procedure on the inner fender on the opposite side of the vehicle to prevent stones or debris from getting
trapped in the future.
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer
