Tracker 4WD L4-2.0L VIN C (1999)
Backup Lamp Switch: Service and Repair
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative (-) battery cable.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the backup lamp switch electrical connector (1) from the backup lamp switch.
4. Remove the backup lamp switch (1) from the upper case (2).
5. Inspect the backup lamp switch.
6. Inspect the backup lamp switch O-ring for cuts or damage. Replace the backup lamp switch O-ring if necessary.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
